The odd shape of the SCART socket makes it a challenge to cut a clean opening for bulkhead or case mounting.
These simple 3D printed trimplates can be used to:
-Mark the outline of your SCART jack, for use as a cut / drill template
-Install on the outside of the device to provide a clean, professional appearance
See example photos for appearance/fit on our straight & right angle connectors (sold separately).
20mm x 70mm overall size.
2mm thickness overall.
4.5mm diameter hardware mounting holes @ 3mm thickness.
8-9mm washer (US #4 - #6 size) recommended for hardware to ensure even loading.
Avoid over-tightening hardware. Hardware should have lock washers or threadlocking compound.
Especially important for CRT mods as you don't want metal hardware to come loose and drop inside of the chassis!