Self-Adhesive Joystick Dome Switches - 10mm Quad / 4 Leg

Availability: In stock

$0.44
  • Buy 10 for $0.39 each and save 12%
  • Buy 20 for $0.35 each and save 21%
  • Buy 40 for $0.29 each and save 35%
Units on Hand: 86
Instant Checkout,
No Account Necessary:
Checkout with PayPal

OR

Quick Overview

Replacement tactile dome switch arrays, ready to cut, peel, and place!

Self-Adhesive Joystick Dome Switches - 10mm Quad / 4 Leg

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Replacement dome switches, 10mm, 4-leg (Plus shaped), nickel plateed on peel-and-stick adhesive!

No messing with packing tape or other poor-quality, unsuitable adhesives!

Original-style exertion forces!

Please note: Price is per dome.  A single one-button joystick would require 5 switches.

For years, we tried to find a manufacturer to produce a universal peel and stick dome switch for us at a reasonable cost.  In the end, we built our own assembly fixtures and now produce these in-house!

Many pre-NES machines use 3 or 4 leg dome switches for joysticks, console reset buttons, or other uses requiring a tactile feel.  Over time these domes will crack or become detached.  Sometimes the manufacturers used improper adhesives, or maybe the joystick never worked well to begin with!

We use nickel-plated domes - a tenfold improvement in conductivity compared to the original stainless-steel domes.  They are placed in rows of 5 under a clear adhesive that is stronger yet easier to work than plain packing or clear tapes.  Most 1-button joysticks will use 5 domes: one for each direction, and one for the fire button.

Installation requires removal of original domes and cleanup of surrounding adhesive.  The circuit board metal should be clean and free of contamination before applying new domes.  For copper PCBs, we recommend using a copper polish first followed by an isopropyl rinse to remove all traces of polish.

Over the years, suppliers of plain dome switches have come and gone.  Most of the time, these replacements have been the wrong style or have the wrong exertion forces, and none of them have ever been provided with proper adhesives.  We have also seen gold-plated domes, which for the additional cost provide very little real-life benefit in this application.

Due to the handmade nature of this item there will be some slight variation in adhesive sizing and orientation of the domes.  Each dome will have approximately .8sq/in to 1sq/in of adhesive.

Additional Information

Compatible Hardware Atari 2600, Atari 7800, Commodore 64, Commodore VIC20, Mattel Intellivision, Mattel Intellivision II, Tandyvision
About Console5 Products

Unless noted in the description, all Console5 products are fully tested and guaranteed.  Cap kits are made using name brand, high quality, high-temp parts from Nichicon, Panasonic, and other reputable companies.