Soldering Iron T-Tip for LCD Repair - 30W Version (4mm shaft Size)

More Views

Soldering Iron T-Tip for LCD Repair - 30W Version (4mm shaft Size)
  • Buy 2 for $3.65 each and save 8%
  • Buy 3 for $3.45 each and save 13%
  • Buy 5 for $2.95 each and save 26%

Availability: Out of stock

Specialized soldering tip and silicone pad for refreshing LCD ribbon solder pads

Units on Hand: 0



No longer available in 30W, please see our other options.

These specialized T-Tip soldering iron tips can help restore missing lines from LCD displays.  Over time, certain handheld devices are prone to disappearing lines from their LCD display.  These specalized tips help evenly reheat and reattach the faulty ribbon connection.

Usage tips:

A cheap iron is OK, just be patient and allow it to come up to full temperature.

The silicone pad should be trimmed with scissors or Xacto blade to the width of the ribbon cable.  You need to evenly heat the entire length and width of the ribbon.  If the ribbon is narrow or there is a ridge cast into the LCD frame, the silicone pad should be trimmed to ensure a full fit.

You may find that the center of the bar is hotter than the edges. Trimming the length of the silicon pad can be used to alter the focus of heat.

If possible, leave the device turned on while reheating the ribbon and monitor the display.  This will help you to know when the lines begin to reappear.

Immediately after the procedure, a few lines may still be missing.  Allow things to completely cool before evaluating.  Our tests on a Game Boy DMG-01 showed that a few lines on the edge were missing for up to a few hours after.  By the next day, the LCD was 100% operational.

Additional Information

Additional Information

Compatible Hardware Nintendo Game Boy (DMG-01)

Unless noted in the description, all Console5 products are fully tested and guaranteed.  Cap kits are made using name brand, high quality, high-temp parts from Nichicon, Panasonic, and other reputable companies.